Securegel VG5 2x5L - Gél állagú tisztítószer
Cikkszám
5600053
Securegel is a ready to use gel cleaner, designed for cleaning heat exchangers of chiller units in the food, beverage and dairy industries. • Securegel contains an effective blend of wetting agents, emulsifiers and solvents. It is applied neat to the surface via spray equipment and forms a
Leírás
Securegel is a ready to use gel cleaner, designed for cleaning heat exchangers of chiller units in the food, beverage and dairy industries.
• Securegel contains an effective blend of wetting agents, emulsifiers and solvents. It is applied neat to the surface via spray equipment and forms a tenacious film with condensate water. It must not be rinsed off. The tenacious product film slowly dissolves in the condensate to give a continuous release of its cleaning properties. • Securegel is non-corrosive toward materials normally encountered in chiller units, including aluminium, copper and galvanised surfaces. However, it should not be used on units with a coated heat exchanger. • Securegel is suitable for use with most types of low-pressure spray equipment.
Good soil penetration and emulsifying properties. Forms a tenacious film which goes on cleaning longer.
Every 3-4 weeks, apply Securegel neat direct to chiller surfaces at the rate of 0.25-0.50 litres per m3.
• Securegel contains an effective blend of wetting agents, emulsifiers and solvents. It is applied neat to the surface via spray equipment and forms a tenacious film with condensate water. It must not be rinsed off. The tenacious product film slowly dissolves in the condensate to give a continuous release of its cleaning properties. • Securegel is non-corrosive toward materials normally encountered in chiller units, including aluminium, copper and galvanised surfaces. However, it should not be used on units with a coated heat exchanger. • Securegel is suitable for use with most types of low-pressure spray equipment.
Good soil penetration and emulsifying properties. Forms a tenacious film which goes on cleaning longer.
Every 3-4 weeks, apply Securegel neat direct to chiller surfaces at the rate of 0.25-0.50 litres per m3.
Specifikációk
Általános adatok | ![]() |
|
Logisztikai adatok | ![]() |
|
Kémiai-vegyi adatok | ![]() |
Mellékletek
Vélemények (0)
Még nem érkezett vélemény.